Fiber Cement Light Density Panel
Keywords:
Category:
Product Description
Product No.
K10/K10+
Product Introduction
Class A1 fire-resistant Fiber Cement board is a new type of lightweight, high-strength green building material. It adopts cement and quartz sand as cementitious materials, imported wood pulp fiber as reinforcing material, and lightweight gel generated through dynamic reaction under high temperature and high pressure. The finished product is made via pulping, forming, autoclaving, curing and other processes.
Size (Length × Width × Thickness)
2440×1220×(6, 8, 9, 10, 12) mm; customized sizes available upon request
Density
0.8＜D≤0.9
Performance & Technical Parameters
- Apparent Density: 0.8 ＜ D ≤ 0.9 g/cm³
- Moisture Content: ≤15%
- Dry Modulus of Rupture: ≥10 MPa
- Screw Holding Power: ＞80 N/mm
- Impact Resistance: ＞1.8 kJ/m²
- Thickness Swelling Rate: ≤0.20%
- Internal Bond Strength: ≥1.0 MPa
- Thermal Conductivity: ≤0.2 W/(m·K)
- Combustion Performance: Non-combustible Class A1
- Formaldehyde Emission: 0
- Asbestos Content: Not Detected
Product Advantages
- Fully non-combustible material: Class A1 non-combustible rating. No toxic smoke released during combustion. Its smoke toxicity hazard grade complies with GB/T20285 and reaches safety grade AQ1.
- Eco-friendly: 100% free of asbestos, radioactive substances, formaldehyde and other harmful substances.
- Lightweight yet high-strength: Only half the weight of stone, which effectively reduces building load.
- Moisture and pest resistant: Low thickness swelling rate, resistant to deformation and mildew, with excellent termite-proof performance.
- Excellent screw holding capacity: Firmly holds nails and screws to prevent loosening and falling off; drilled holes can be reused multiple times.
- Superior sound insulation: Outstanding noise reduction effect when matched with keels, rock wool and other filling materials.
- Easy construction: Hand-cuttable, flexible for curved shaping without edge chipping or cracking. Applied in the same way as wood boards and can be fixed directly with nail guns to greatly improve construction efficiency.
- Outstanding comprehensive performance: Meets various architectural requirements. The Class A1 fire-resistant Fiber Cement board system covers a wide range of non-load-bearing application scenarios. It balances mechanical strength and light weight, boasts multiple premium properties and outstanding durability to enhance building safety.
Application Fields
- Partition Systems: Base lining boards for light steel keel partitions and high sound-insulation partitions
- Wall Leveling Systems: Wall base lining boards, backing boards for soft and hard wall upholstery
- Ceiling Base Boards: For curtain boxes, light troughs and decorative moldings
- Floor Systems: Structural boards for underfloor heating and raised access floors
Color
Off-white
Product Inquiry
Contact Information
National Sales Hotline: 400-906-6996
Mr Jason:
+8613545719507
shaoye@sinoma-ec.cn
WeChat Official Account
WeChat Channels
Official Douyin